Description
Product: Natural PP Super (Polypropylene Resin)
Polymer: Polypropylene (PP)
CAS Number: 9003-07-0
HS Code: 3902.10 (PP in primary forms)
Important: Natural PP Super is a commercial description rather than a standardized polymer grade. It is important to confirm whether the material is virgin, recycled, homopolymer or copolymer.
Technical Specifications
| Parameter | Typical Specification |
|---|---|
| Appearance | Natural / translucent pellets |
| Colour | Natural white |
| Polymer Type | Polypropylene |
| Melt Flow Rate (MFR) | 2–40 g/10 min |
| Density | 0.900–0.910 g/cm³ |
| Melting Point | 160–170°C |
| Tensile Strength | 30–38 MPa |
| Flexural Modulus | 1,200–1,800 MPa |
| Elongation at Break | Grade dependent |
| Moisture Content | 0.05% maximum |
| Form | Granules / Pellets |
The following is a proposed purchasing specification for a general-purpose injection moulding grade.
| Parameter | Required Specification |
|---|---|
| Polymer Type | PP Homopolymer |
| Melt Flow Rate (MFR) | 12–20 g/10 min |
| Recommended Target MFR | 15 g/10 min |
| Test Standard | ASTM D1238 |
| Test Condition | 230°C / 2.16 kg |
| Density | 0.900–0.910 g/cm³ |
| Melting Temperature | 160–165°C |
| Tensile Strength at Yield | 30–36 MPa |
| Flexural Modulus | 1,200–1,600 MPa |
| Notched Izod Impact | Grade dependent |
| Elongation at Yield | 8–15% |
| Moisture Content | 0.05% maximum |
| Ash Content | 0.05% maximum |
| Appearance | Clean, uniform pellets |
| Odour | Neutral / characteristic polymer odour |
The mechanical-property ranges are indicative purchasing targets. The final specification must match the manufacturer’s actual grade and test methods.
3. Recommended MFR – Melt Flow Rate
The correct Melt Flow Rate depends on the finished product and mould design.
| MFR (g/10 min) | Suitable Application |
|---|---|
| 5–8 | Thick-walled moulded products |
| 10–12 | General-purpose injection moulding |
| 12–20 | Buckets, crates, containers and household products |
| 20–25 | Higher-flow injection moulding |
| 25–40 | Thin-wall injection moulding and fast-cycle applications |
My recommendation: Specify MFR 15 ± 2 g/10 min for general-purpose injection moulding. If manufacturing thin-wall products, consider MFR 25–35 instead.
4. Certificate of Analysis (COA)
The following is a purchasing reference COA, not an actual manufacturer-issued batch certificate.
Product: Virgin PP Homopolymer – Injection Grade
Proposed grade: MFR 15
| Test Parameter | Specification | Illustrative Result |
|---|---|---|
| Appearance | Natural pellets | Pass |
| Melt Flow Rate | 13–17 | 15.0 |
| Density (g/cm³) | 0.900–0.910 | 0.905 |
| Tensile Strength at Yield (MPa) | 30–36 | 33 |
| Flexural Modulus (MPa) | 1,200–1,600 | 1,400 |
| Melting Point (°C) | 160–165 | 163 |
| Moisture (%) | ≤0.05 | 0.02 |
| Ash Content (%) | ≤0.05 | 0.02 |
| Colour | Natural | Pass |
| Contamination | None visible | Pass |
The actual COA must contain the manufacturer’s test results, batch number, production date, test methods and authorized approval. Do not use these illustrative results
A reasonable target for sourcing standard virgin PP homopolymer injection grade, subject to origin, brand, availability and actual batch quality.
| Requirement | Specification |
|---|---|
| Packaging | 25 kg bags |
| Total Quantity | 20,000 kg |
| Number of Bags | 800 |
| Palletization | As agreed |
| Container | Normally 1 × 20 ft container, subject to payload and packaging |
| Shipping Term | FOB |
| Inspection | Pre-shipment inspection if agreed |
| Documents | Commercial Invoice, Packing List, B/L, COA, SDS and Certificate of Origin |
For your purchase, I recommend requiring:
-
Manufacturer-issued COA for the actual production batch.
-
Confirmation of 100% virgin material, not recycled or reprocessed.
-
Manufacturer’s original grade and brand identification.
-
Pre-shipment inspection and representative sample approval.
-





Reviews
There are no reviews yet.